Axial  |  AX24010

AXIAL VANGUARD 2900KV MOTOR BRUSHLESS EXO RTR


£98.19

Notify me when available

Axial’s new Vanguard Brushless Motor is designed to be a replacement motor for 2wd and 4wd 1/10th scale trucks. Superior performance and efficiency over standard brushed motors with less maintenance. What does that mean exactly? It means more run time and less down time, always a winning combo! Get a step up on the competition with brushless power! Manufactured by Castle Creations.

Features:

• 2900KV motor
• 2 pole design
• 3mm motor shaft
• Laser etched logos
• Black anodized motor can
• Blacked out motor wires are clearly labeled A, B and C for an easy and stealthy installation

Vanguard Motor Specifications:

Dimensions: 1.42 x 1.85 in (36mm x 47mm)
Weight: 6.8 oz (194g)
KV (RPM/V): 2900kV
Voltage Input: 3S Max
Shaft Diameter: 0.125 in (3.175mm)
Poles: 2
Wires: 13AWG Silicone, 7 3/4 in (197mm)
Connectors: 4mm male bullet connectors

Please note it is very important to monitor ESC and motor temps during your first initial run to ensure temperatures remain reasonable. If temps are too high under normal conditions try changing the overall gear ratio with either a smaller pinion or a bigger spur gear.

Axial

AXIAL VANGUARD 2900KV MOTOR BRUSHLESS EXO RTR

£98.19

Axial’s new Vanguard Brushless Motor is designed to be a replacement motor for 2wd and 4wd 1/10th scale trucks. Superior performance and efficiency over standard brushed motors with less maintenance. What does that mean exactly? It means more run time and less down time, always a winning combo! Get a step up on the competition with brushless power! Manufactured by Castle Creations.

Features:

• 2900KV motor
• 2 pole design
• 3mm motor shaft
• Laser etched logos
• Black anodized motor can
• Blacked out motor wires are clearly labeled A, B and C for an easy and stealthy installation

Vanguard Motor Specifications:

Dimensions: 1.42 x 1.85 in (36mm x 47mm)
Weight: 6.8 oz (194g)
KV (RPM/V): 2900kV
Voltage Input: 3S Max
Shaft Diameter: 0.125 in (3.175mm)
Poles: 2
Wires: 13AWG Silicone, 7 3/4 in (197mm)
Connectors: 4mm male bullet connectors

Please note it is very important to monitor ESC and motor temps during your first initial run to ensure temperatures remain reasonable. If temps are too high under normal conditions try changing the overall gear ratio with either a smaller pinion or a bigger spur gear.

View product