1 13
FMS  |  FMS108P

FMS Yak 130 EDF 70mm V2 ARTF w/o Tx/Rx/Batt - FMS108P

£363.00
RRP: £399.99
Save £36.99
Notify me when available

FMS YAK 130 EDF 70MM V2 ARTF w/o TX/RX/BATT

Committed to the design and production of cutting-edge scale model aircraft, FMS has dedicated an extraordinary amount of effort in the design of the Yak 130 V2 to ensure that it’ll also be at the pinnacle of model aviation. Finding a balance between scale and performance has always been a challenge, it took numerous prototypes, test flights and modifications to refine the Yak 130 V2 into its final form. FMS is confident that this is the most accurately defined Yak on the market today.

Small details such as the plastic leading edge of the air intake, which reduces turbulent airflow and protects the air duct from debris, are implemented onto the airframe. The panel lines, cockpit interior, scale pilot and even the auxiliary fuel tanks are made with significant attention to detail. Even the way the aircraft is assembled has been optimized- with a screw-together airframe, it’s now possible to build the Yak 130 V2 in the time it takes to charge the flight battery.

Utilizing the FMS 70mm 12-bladed EDF unit, Predator 2860-1850KV motor and an upgraded 80A ESC, the Yak 130 V2 has more than enough thrust to tackle the most demanding of manoeuvres. A Strong upgraded metal landing gear set provides added support and strength to absorb the impact of less-than-perfect landings. All servos are pre-mounted and are optimized for this aircraft, ensuring absolute reliability and manoeuvrability.

Don’t settle for any less than the best- FMS Yak 130 V2

 

FMS YAK 130 EDF 70mm V2 Features:

  • Upgraded and detailed metal landing gear set for added support and strength
  • Metal-geared servos for precise and accurate control surface movements
  • Scale details - pilot figure, auxiliary fuel tank, retractable landing gear and flaps
  • Retractable landing gear system
  • Fully functional flaps, ball-linked control horns for precision manoeuvres
  • Latch-type canopy for simplified assembly methods
  • Water-based, environmentally-friendly paint for more vibrant colours
  • 70mm 12-bladed fan provides high power-to-weight ratio

Spec Check:

  • Wingspan 880mm / 34.6in
  • Overall Length 1060mm / 41.7in
  • Flying Weight Around 1850g
  • Motor Size Inner running Brushless 2860 KV1850
  • ESC 80A
  • Servo 9g x 8
  • Radio 6 Channel
  • CG (centre of gravity) 80-85mm (From Leading Edge)
  • Prop Size 70mm 12-bladed fan
  • Recommended Battery 4S 2600-3300mAh 35C Li-Po
  • Aileron Yes
  • Elevator Yes
  • Rudder Yes
  • Flaps Yes
  • Retracts Yes
  • Minimum Age Recommendation 14+
  • Experience Level Intermediate
  • Recommended Environment Outdoor
  • Assembly Time 30 minutes
  • Material Durable EPO

Please Note: This kit requires the following for completion: 2.4 Ghz Radio System, 4S 2600-3300mAh 35C Li-Po Battery and Charger.

 

FMS

FMS Yak 130 EDF 70mm V2 ARTF w/o Tx/Rx/Batt - FMS108P

£363.00

FMS YAK 130 EDF 70MM V2 ARTF w/o TX/RX/BATT

Committed to the design and production of cutting-edge scale model aircraft, FMS has dedicated an extraordinary amount of effort in the design of the Yak 130 V2 to ensure that it’ll also be at the pinnacle of model aviation. Finding a balance between scale and performance has always been a challenge, it took numerous prototypes, test flights and modifications to refine the Yak 130 V2 into its final form. FMS is confident that this is the most accurately defined Yak on the market today.

Small details such as the plastic leading edge of the air intake, which reduces turbulent airflow and protects the air duct from debris, are implemented onto the airframe. The panel lines, cockpit interior, scale pilot and even the auxiliary fuel tanks are made with significant attention to detail. Even the way the aircraft is assembled has been optimized- with a screw-together airframe, it’s now possible to build the Yak 130 V2 in the time it takes to charge the flight battery.

Utilizing the FMS 70mm 12-bladed EDF unit, Predator 2860-1850KV motor and an upgraded 80A ESC, the Yak 130 V2 has more than enough thrust to tackle the most demanding of manoeuvres. A Strong upgraded metal landing gear set provides added support and strength to absorb the impact of less-than-perfect landings. All servos are pre-mounted and are optimized for this aircraft, ensuring absolute reliability and manoeuvrability.

Don’t settle for any less than the best- FMS Yak 130 V2

 

FMS YAK 130 EDF 70mm V2 Features:

Spec Check:

Please Note: This kit requires the following for completion: 2.4 Ghz Radio System, 4S 2600-3300mAh 35C Li-Po Battery and Charger.

 

View product
Back to top