×

Registration

Profile Information

Login Data

Or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Matek F722-STD Flight Controller

£30.01

Availability: Out of stock

SKU: Matek-F722-STD-Flight-Controller

Availability: Out of stock

£30.01
When flashing use Matek F722 Target
Description

Details

The all New flight controller coming from Matek is the F722 STD with built in Betaflight OSD, Black Box and Barometer. This is a choice of most Drone Racing pilots as Matek is a leading brand.

Features:

  • MCU: 216MHz STM32F722RET6
  • IMU: 32K ICM20602 gyro/accelerometer (SPI)
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • PPM/UART Shared: UART2-RX
  • Battery Voltage Sensor: 1:10
  • Current Sensor: No (FCHUB-6S, FCHUB-VTX option)
  • BEC 5V: No (FCHUB-6S, FCHUB-VTX option)
  • LDO 3.3V: Max.300mA
  • I2C1 SDA & SCL: Yes
  • Camera control: Yes
  • DAC: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 7x PWM / DShot outputs without conflict
  • 5x UARTs
  • 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 1x I2C1
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S or FCHUB-VTX connection
  • 36x36mm PCB with 30.5mm mounting holes
  • w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
  • w/ 4pcs M3 Anti-vibration Standoffs

BetaFlight Github

Drivers & Software

BetaFlight Firmware

Package included

  • 1 x F722-STD flight controller
  • 2 x 0.5mm*16Pin 5cm Flexible Flat Cable
  • 4 x M3 Anti-vibration Standoffs
F722 Wiring Diagram
Additional Information

Additional Information

Manufacturer Matek
Technical Specification No