×

Registration

Profile Information

Login Data

Or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Matek FCHUB-6S Hub Power Distribution Board 5V & 10V BEC Built-in 184A Current Sensor

£3.53

Availability: In stock

Order now, and receive it by : Tuesday, 24 April

SKU: Matek-FCHUB-6S-Hub-Power-Distribution-Board-5V-10V-BEC

Availability: In stock

£3.53
OR
Best for high-performance FPV Racing!
Description

Details

Mateks FCHUB-6S PDB can be applied with a 3-6s LiPo batery to 4 ESCs, at the same time it can provide regulated & filtered DC 5V & DC 10V outputs. It can power Cameras, Receivers, Flight Controllers, VTX, LEDs and more! It also has a built in 18A sensor but also offers a FFC socket to connect the Matek flight controller.

Features

  • - Total 4 pairs ESC solder tabs are fix for X Type frame
  • - Max. 27V input w/ TVS protection
  • - Built-in current sensor 184A
  • - PDB: 4*30A ( 4*46A, 5 seconds), 4 layers*2oz copper PCB
  • - BEC 5V@1.5A ( Max. 2A) w/ 100uf panasonic POSCAP filter
  • - BEC 10V@1.5A ( Max. 2A) w/ 47uf TDK MLCC filter
  • - 5V&10V output LED indicators & Short circuit tolerant

  • 5V BEC Output:
  • - Designed for RC Receivers, Flight Controllers, OSD and Servos.
  • - DC/DC synchrous buck regulator
  • - Voltage: 5.0V (4.9-5.1)DC
  • - Current: 1.5A (Max. 2.0A 10S/minute)
  • - Short-circuit tolerant ( 2 Seconds/minuate)

  • 10V BEC Output:
  • -Designed for VTX or FPV Camera
  • - Voltage: 10.0V (9.8-10.2) DC
  • - Current: 1.5A ( Max. 2.0A 10S/minute)
  • - Short-circuit tolerant ( 2 Seconds/minuate)
  • - 10V can be used to power cameras labeled as 12V.
  • - The 3S Lipo input voltage should be 11V plus.

  • Current Sensor Module
  • - Max. Range: 184A
  • - 3.3V ADC
  • - Scale the output voltage to milliamps ( 1/10th mW/A): 179

What's Included ?

  • 1 x FCHUB-6S PDB Board
  • 1 x bag of screws
Additional Information

Additional Information

Manufacturer Matek
Technical Specification N/A