Matek FCHUB-6S Hub Power Distribution Board 5V & 10V BEC Built-in 184A Current Sensor
SKU
matek-fchub-6s-hub-power-distribution-board-5v-10v-bec
£3.79
£0.00 RRP
Out of stock
Categories: FPV Drones, Matek
Mateks FCHUB-6S PDB can be applied with a 3-6s LiPo batery to 4 ESCs, at the same time it can provide regulated & filtered DC 5V & DC 10V outputs. It can power Cameras, Receivers, Flight Controllers, VTX, LEDs and more! It also has a built in 18A sensor but also offers a FFC socket to connect the Matek flight controller.
Features
- - Total 4 pairs ESC solder tabs are fix for X Type frame
- - Max. 27V input w/ TVS protection
- - Built-in current sensor 184A
- - PDB: 4*30A ( 4*46A, 5 seconds), 4 layers*2oz copper PCB
- - BEC 5V@1.5A ( Max. 2A) w/ 100uf panasonic POSCAP filter
- - BEC 10V@1.5A ( Max. 2A) w/ 47uf TDK MLCC filter
- - 5V&10V output LED indicators & Short circuit tolerant
- 5V BEC Output:
- - Designed for RC Receivers, Flight Controllers, OSD and Servos.
- - DC/DC synchrous buck regulator
- - Voltage: 5.0V (4.9-5.1)DC
- - Current: 1.5A (Max. 2.0A 10S/minute)
- - Short-circuit tolerant ( 2 Seconds/minuate)
- 10V BEC Output:
- -Designed for VTX or FPV Camera
- - Voltage: 10.0V (9.8-10.2) DC
- - Current: 1.5A ( Max. 2.0A 10S/minute)
- - Short-circuit tolerant ( 2 Seconds/minuate)
- - 10V can be used to power cameras labeled as 12V.
- - The 3S Lipo input voltage should be 11V plus.
- Current Sensor Module
- - Max. Range: 184A
- - 3.3V ADC
- - Scale the output voltage to milliamps ( 1/10th mW/A): 179
What's Included ?
- 1 x FCHUB-6S PDB Board
- 1 x bag of screws
manufacturer | Matek |
---|