Matek FCHUB-VTX W/5.8G PDB & Video Transmitter

£28.79 £0.00 RRP
Out of stock

Matek' most advanced PDB. This Matek Board comes with an integrated PDB, VTX, and a current sensor! The perfect match and we recommend you use the Matek F405 FC which can be connected by a ribbon cable, allowing for a very clean build. The FCHUB-VTX uses Betaflight OSD or by means, you can use Lua script which is directly from your transmitter. The VTX on the board holds a MMCX antenna connector and has frequency and manual CH buttons to control them.

Specs & Features

  • Input voltage: 6~27V(2~6S LiPo)
  • PDB: 4*30A (4*46A, 5 seconds)
  • Current Sensor: 184A (Scale 179)
  • BEC Output: 5V/1A for Camera or FC
  • VTX: 40 standard 5.8G channels, A/B/E/F/R Band
  • VTX Output Power: 25, 200, 500mW switchable
  • Traditional button+LED control of frequency and power
  • BFCMS (BFOSD & LUA Script) control via FC UART _TX
  • Video signal & TX5 are ready on FFC connected with MATEK FC F405-OSD
  • Silicon wires connection with other brands FC
  • Firmware upgradeable
  • VTX Power Consumption: 3.1W Max. @ 500mW
  • Video Input Impedance: 75 Ohm
  • Audio Subcarrier Frequency: 6.5 MHz
  • RF Connector: MMCX
  • Video Format: NTSC/PAL
  • Weight: 14g (w/ MMCX whip antenna)
  • Size: 36*45*7mm w/30.5mm mounting

What's Included

  • 5.8G Video transmitter
  • MMCX to SMA Female, 9cm
  • PVC Heat-shrink tube
manufacturer Matek

You Might Also Be Interested In