×

Registration

Profile Information

Login Data

Or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Lumenier QAV-X CHARPU

£67.00

Availability: Out of stock

SKU: Qax-x-charpu-fpv

Availability: Out of stock

£67.00
Lumenier QAV-X CHARPU Carbon fiber FPV Racing frame, low profile, sleek design.
Description

Details

Lumenier have released a frame in collaboration with the world famous Lumenier pilot, CHARPU.

This is the QAV-X CHARPU frame which is a 'X' frame made out of carbon fibre for durability. This quadcopter is lightweight, strong and finely tuned for high performance. Finest quality of carbon fiber there, the QAV-X CHARPU has been stripped down to the bare essentials of FPV without sacrificing anything important. No need to 3D print your own custom mount to angle your camera up, there is already one pre-made in the box. All you need to do is make sure your camera is securely attached to the FPV Frame and you're off.

The main FPV Body is a 3mm plate is CNC milled out of a solid sheet of premium Lumenier carbon fiber. The outer weave of Carbon fiber runs 100% down each arm of the QAC-X(0/90 weave). allowing the frame maximum strength of carbon and arms. The top plate of the Carbon fiber frame included an accessory antenna extension plate, allowing for multiple cable ties to lock down your FPV Antenna. Another great feature is you can no longer damage the SMA connection on your Video Transmitter, the top plate has been specially desinged so you can reach the VTX button and LED display for easy channel adjustment. The balancing bumps on the sides of the top plate make it more simple to measure the center of gravity on your frame, this allows you to get the percvect balance while flying the aircraft.

Each kit will include a carbon fiber battery protector plate. The QAV-X CHAPRU is designed to strap a Li-Po battery to the bottom of the frame which exposes the battery during a hard landing or crash, this is what the carbon fiber battery protector plate is for, it takes the punch for the battery or alternatively you can use some Neoprene foam to create a landing pad for the battery.

This FPV Frames comes with high quality aluminium hardware, all the screws are premium, black oxide steel. The spacers have a textured grip and are also 28mm rather than the standard 35mm, this allows to FPV Frame to have a sleek, low profile look.

Features

  • Full 3K Carbon Fiber airframe featuring a solid 3mm main plate.
  • Dual purpose FPV and HD camera mounting solution.
  • Compact size for 5" propellers, 214mm motor to motor.
  • Black Oxide steel screws
  • Easy grip black anodized spacers
  • Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
  • "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
  • Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).
  • LiPo battery protection plate included.
  • Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
  • Support to carry HD camera at 35 degree angle(such as the GoPro 4, Xiaomi Yi, etc).
  • Lightweight and rigid


In the Box:

  • 1x QAV-X CHARPU Carbon Fiber air frame kit (3mm)
    • 3mm carbon fiber unibody main plate
    • 2mm carbon fiber top plate
    • 1.5mm carbon fiber antenna plate
    • 2x 1.5mm carbon fiber camera sidewall plates
    • 1x 1.5mm HD camera mounting plate
    • 1x 1.5mm Battery protector plate
  • 1x Set of black steel screws and aluminum hardware including knurled spacers
  • 1x Lumenier 4Power Power distribution board + 3mm spacer / screw set
  • 1x set 6mm black polyamide spacers / screws for flight controller
  • 1x XT-60 Pig-Tail
  • 2x Neoprene foam tape
  • 1x Lumenier small lipo strap
Additional Information

Additional Information

Manufacturer Lumenier
Technical Specification N/A