SpeedyBee Bluetooth UART Adapter

SKU
speedybe-bluetooth-uart-adapter
-40% Off RRP
Special Price £6.36 £0.00 RRP
Out of stock
Note: Flashing firmware cannot be done with this adapter.

The SpeedyBee Bluetooth UART Adapter helps you configure your flight controller settings directly from your phone or tablet without having to plug into your computer every time. The Bluetooth signal also shuts down when your throttle is armed so that there is no interference during flight. As soon as the throttle is disarmed, the signal activates automatically.

Once you download the SpeedyBee app (requires at least iOS 10 or Android 4.3+) you will be able to tune your quad through the Betaflight configurator. The app also supports CLI and PID settings.

Specifications

  • Output Power: 0dBm
  • Receiver Sensitivity: -94 dBm
  • External Interfaces: BROADCAST SWITCH, TX, RX, 3~5V DC Input, GND
  • Transmission rate: Bidirectional 1K/S
  • Bluetooth Protocol: Bluetooth Specification V4.0 BLE
  • Transmission distance: 30m
  • Frequency range: 2400 MHZ - 2483.5MHZ(2.4G ISM Band)
  • Baud rate: 2400,4800,9600,14400,19200(default),28800,38400,
  • 57600,76800,115200,230400
  • Operating Voltage: 3.3V - 5.0V DC
  • Working current: 8.3mA~10mA
  • Weight: 1.4g
  • Dimensions: 27*15*4.5mm

What's Included?

  • 1x Bluetooth PCB
  • 1x 5Pin Cable
  • 1x 3M Double-sided Tapes
  • 1x Heatshrink Tube
  • 1x Manual
manufacturer SpeedyBee

You Might Also Be Interested In