Hobbico  |  HCAR3400

HOBBICO Hobbylite Filler 8oz (237 ml) White

£5.29

Notify me when available

HobbyLite Filler - White

Formulated especially for model building, HobbyLite spreads easily, dries fast andsands to a smooth finish that's perfect for painting or covering. It permanentlyfills cracks and pinholes in all wood, foam and fibreglass - without shrinking - andremains as light as air.

  • Quickly fills imperfections in all materials - with one easy application
  • Dries fast and sands like balsa but won't clog sandpaper
  • Lightweight, no-shrink mixture is ideal for making fillets and contours
  • Ready to use immediately

Quantity - 8 Fl.Oz. (237ml)

Instructions for use:

  • 1. Clean the area to be filled using a brush or vacuum.
  • 2. Stir HobbyLite thoroughly. If necessary, use water sparingly for thinning. Too much water may result in shrinkage when the filler dries.
  • 3. Apply HobbyLite to the desired area using a spatula or plastic spreader. Reseal tub tightly.
  • 4. Clean your tools and work surface with soap and water.
  • 5. After allowing the filler to dry completely, finish it with sandpaper to a satin-smooth finish.
  • 6. Drying time depends on the thickness of the material applied. Normal dents and dings less than 1.5mm deep will dry in about 15 minutes. Deeper gouges or fillets should be allowed to dry for an hour or more.
    • Hobbico

    HOBBICO Hobbylite Filler 8oz (237 ml) White

    £5.29

    HobbyLite Filler - White

    Formulated especially for model building, HobbyLite spreads easily, dries fast andsands to a smooth finish that's perfect for painting or covering. It permanentlyfills cracks and pinholes in all wood, foam and fibreglass - without shrinking - andremains as light as air.


    Quantity - 8 Fl.Oz. (237ml)

    Instructions for use:

  • 1. Clean the area to be filled using a brush or vacuum.
  • 2. Stir HobbyLite thoroughly. If necessary, use water sparingly for thinning. Too much water may result in shrinkage when the filler dries.
  • 3. Apply HobbyLite to the desired area using a spatula or plastic spreader. Reseal tub tightly.
  • 4. Clean your tools and work surface with soap and water.
  • 5. After allowing the filler to dry completely, finish it with sandpaper to a satin-smooth finish.
  • 6. Drying time depends on the thickness of the material applied. Normal dents and dings less than 1.5mm deep will dry in about 15 minutes. Deeper gouges or fillets should be allowed to dry for an hour or more.
    • View product
    Back to top