HPI  |  349

En-2 Electronic Speed Control With Reverse


£15.59
RRP: £15.99
Save £0.40
Home Delivery Available to order

        Allow 7-10 day(s) for order dispatch

EN-2 Micro ESC with Reverse. As standard in the Micro RS4.



Specification:



  • Input Voltage: 7.2V-8.4V(NiMH)

  • Output: Rating: 35A, Peak: 60A

  • Out max power :25A/7.2V (Max 180W)

  • Size: 23x29x18.8mm

  • Weight: 19.5g

  • BEC: 5V/1A

  • P.W.M: 1KHz

  • Motor limit :380 brushed motor [≤7.2V (6cells)]


Please note: This ESC does not have LiPo Low Voltage Cut-Off
Protection, therefore it is not suitable to be used with LiPo
Battery Packs.


NOTE: NOT
WATERPROOF!
 Before driving in wet conditions, make
sure that all electronics fitted to the vehicle are safe to use
(marked as water-resistant or waterproof), or that they are fully
enclosed and protected from water and moisture (such as in a sealed
receiver/battery case). Fans mounted on speed controllers are not
water resistant - we recommend to disconnect the fan from the
ESC before driving in wet conditions and allow it to dry fully
before reconnecting the fan power. Lubricate exposed metal
drivetrain parts such as bearings, outdrives and diff shafts
before driving in wet conditions. Motors are not intended for
submerged use and may be damaged if used when under water. After
driving in wet conditions, make sure to rinse off dirt and any
corrosive liquids like saltwater with plain water and
re-lubricate metal drivetrain parts. 

Download PDF instructions for #349 (0.8 MB)

HPI

En-2 Electronic Speed Control With Reverse

£15.59

EN-2 Micro ESC with Reverse. As standard in the Micro RS4.



Specification:



Please note: This ESC does not have LiPo Low Voltage Cut-Off
Protection, therefore it is not suitable to be used with LiPo
Battery Packs.


NOTE: NOT
WATERPROOF!
 Before driving in wet conditions, make
sure that all electronics fitted to the vehicle are safe to use
(marked as water-resistant or waterproof), or that they are fully
enclosed and protected from water and moisture (such as in a sealed
receiver/battery case). Fans mounted on speed controllers are not
water resistant - we recommend to disconnect the fan from the
ESC before driving in wet conditions and allow it to dry fully
before reconnecting the fan power. Lubricate exposed metal
drivetrain parts such as bearings, outdrives and diff shafts
before driving in wet conditions. Motors are not intended for
submerged use and may be damaged if used when under water. After
driving in wet conditions, make sure to rinse off dirt and any
corrosive liquids like saltwater with plain water and
re-lubricate metal drivetrain parts. 

Download PDF instructions for #349 (0.8 MB)

View product