Hobao Hyper Vs2 Elecric Truggy 1/8 Rtr With 150A Esc,18Kg Servo

HOBAO HYPER VS2 ELECTRIC TRUGGY 1/8 RTR WITH 150A ESC,18KG SERVO

Take the heavy-duty, highly adjustable Hyper VSTE platform and add a powerful brushless electronics package and the result is an impressive ready-to-run off-road truggy built for serious performance.

At the heart of the Hyper VSTE RTR is a 2000KV 4-pole brushless motor paired with a Hobbywing 150A ESC, providing compatibility with 4S–6S LiPo batteries. Control comes courtesy of a 3-channel 2.4GHz FHSS radio system with dual-rate steering and throttle, while an 18kg-cm digital metal-geared steering servo takes care of steering duties.

The VSTE’s performance hardware is built around a lightweight, hard-anodised CNC-machined 7075 aluminium chassis. Hardened-steel drivetrain components, front, centre and rear metal-geared differentials, reinforced suspension components and 17mm large-bore aluminium shocks provide the durability required for demanding off-road use.

The adjustable battery tray supports both standard shorty and standard-length batteries, while the single-battery configuration can be repositioned to fine-tune the vehicle’s weight distribution and centre of gravity.

With front and rear anti-roll bars, adjustable roll centre, camber, caster, toe and anti-squat settings, plus a full set of ball bearings, the Hyper VSTE provides plenty of scope for drivers to tailor the chassis setup to suit different surfaces and driving styles.

Finished with a striking black and green printed body, the Hyper VSTE combines serious brushless power with the strength and adjustability of HoBao’s latest off-road truggy platform.

Features

• 2000KV 4-pole brushless motor.
• Hobbywing 150A ESC compatible with 4S–6S LiPo batteries.
• 3-channel 2.4GHz FHSS radio with dual-rate steering and throttle.
• 18kg-cm digital metal-geared steering servo.
• CNC-machined metal components throughout.
• CNC 7075 aluminium chassis, 3mm thick, lightweight and hard-anodised.
• Front and rear stainless-steel skid plates.
• 2mm aluminium centre top brace with laser engraving.
• Hardened-steel driveshafts and drive cups.
• Front, centre and rear differentials with metal bevel gears and anti-leakage housings.
• 17mm ID large-bore aluminium shocks with adjustable rings.
• 4mm high-hardness alloy-steel shock shafts.
• CNC 7075 aluminium shock towers, 5mm thick.
• Reinforced composite upper and lower suspension arms.
• Front and rear anti-roll bars.
• Adjustable roll centre, camber and caster.
• Adjustable toe and anti-squat angles.
• Adjustable battery tray compatible with standard shorty and standard-length batteries.
• Single or dual-battery configuration.
• Full set of ball bearings included.
• 17mm front and rear wheel hex hubs.
• 3.9-inch dish wheels with 17mm hex.
• 3.7-inch mini rectangle pin tyres.
• Black/green printed body.

Specifications

Power Source: Electric
Motor: 2000KV 4-pole brushless
ESC: Hobbywing 150A, 4S–6S compatible
Radio System: 3-channel 2.4GHz FHSS
Servo: 18kg-cm, 4.8V–6V, digital metal gear
Chassis: CNC 7075 aluminium, 3mm thick
Differentials: Front, centre and rear
Pinion Gear: 10T, MOD 1
Ring Gear: 46T, MOD 1
Centre Spur Gear: 45T, MOD 1
Shock Bodies: 17mm ID large-bore aluminium
Shock Shafts: 4mm high-hardness alloy steel
Shock Towers: CNC 7075 aluminium, 5mm thick
Wheel Hex: 17mm front and rear
Wheel Size: 3.9-inch
Tyre Size: 3.7-inch
Body: Black/green printed
Caster: Adjustable
Camber: Adjustable
Ball Bearings: Full set included

Required To Complete

• Suitable 4S–6S LiPo battery with XT90 connector.
• Compatible LiPo battery charger.
• 4 x AA batteries for the transmitter.