Maverick  |  MV150623

Ms-07Wr Servo


£11.39
RRP: £11.99
Save £0.60
Home Delivery Available to order

        Allow 7-10 day(s) for order dispatch

This water-resistant servo is ideal for bashers and racers
looking for a tough and durable servo that can be used in wet
conditions (e.g. rain, snow, puddles).



Features:

Operating Voltage: 4.8-6V

4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm

6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm

Servo Spline: 25T



Dimensions:

Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, &
cable outlet)

Mounting tab hole centres: 49.5.0x9.8mm



Weight: 46g (excluding servo horn)


NOTE: This
servo is water-resistant only, meaning it is resistant to splashes
and brief contact with water. It is not waterproof and therefore
not suitable for submerged used. Before driving in wet conditions,
make sure that all electronics fitted to the vehicle are safe to
use (marked as water-resistant or waterproof), or that they are
fully enclosed and protected from water and moisture (such as in a
sealed receiver/battery case). Fans mounted on speed controllers
are not water resistant - we recommend to disconnect the fan
from the ESC before driving in wet conditions and allow it to dry
fully before reconnecting the fan power. Lubricate exposed metal
drivetrain parts such as bearings, outdrives and diff shafts
before driving in wet conditions. Motors are not intended for
submerged use and may be damaged if used when under water. After
driving in wet conditions, make sure to rinse off dirt and any
corrosive liquids like saltwater with plain water and
re-lubricate metal drivetrain parts. 

Maverick

Ms-07Wr Servo

£11.39

This water-resistant servo is ideal for bashers and racers
looking for a tough and durable servo that can be used in wet
conditions (e.g. rain, snow, puddles).



Features:

Operating Voltage: 4.8-6V

4.8V: Speed: 0.18 sec/60 degrees, Torque: 6kg-cm

6V: Speed: 0.16 sec/60 degrees, Torque: 7kg-cm

Servo Spline: 25T



Dimensions:

Main case: 40x37.5x20.0mm (excluding mounting tabs, servo spline, &
cable outlet)

Mounting tab hole centres: 49.5.0x9.8mm



Weight: 46g (excluding servo horn)


NOTE: This
servo is water-resistant only, meaning it is resistant to splashes
and brief contact with water. It is not waterproof and therefore
not suitable for submerged used. Before driving in wet conditions,
make sure that all electronics fitted to the vehicle are safe to
use (marked as water-resistant or waterproof), or that they are
fully enclosed and protected from water and moisture (such as in a
sealed receiver/battery case). Fans mounted on speed controllers
are not water resistant - we recommend to disconnect the fan
from the ESC before driving in wet conditions and allow it to dry
fully before reconnecting the fan power. Lubricate exposed metal
drivetrain parts such as bearings, outdrives and diff shafts
before driving in wet conditions. Motors are not intended for
submerged use and may be damaged if used when under water. After
driving in wet conditions, make sure to rinse off dirt and any
corrosive liquids like saltwater with plain water and
re-lubricate metal drivetrain parts. 

View product