Maverick  |  MV150624

Msc-60Br-Wp Waterproof Esc With Xt60 Plug 60A


£23.69
RRP: £24.99
Save £1.30
Notify me when available

The MSC-60BR-WP is a powerful and durable speed controller
that is fantastic for all RC vehicles equipped with a brushed motor
of 12 turns or more. The MSC-60BR-WP is also fully waterproof,
making it the only choice for anyone who enjoys playing on the
beach, in snow or even through mud!


If you've got plenty of power to strap into your RC, you can
count on the MSC-60BR-WP to handle it: able to handle LiPo
power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can
handle just about anything can you fit into the chassis! Of course,
a safety cut-off is fitted to protect your LiPo batteries.


Features:

2S or 3S LiPo with voltage protection

5-9 cell NiMH or NiCd

Suitable for all types of 1/10th scale vehicles


Specification:

Forward Continuous Current: 60A

Forward Continuous Current: 60A

Forward Burst Current: 360A

Reverse Continuous Current: 230A

Reverse Burst Current: 180A

Input: 2-3S LiPo, 5-9 cell NiMH/NiCd

Applications: 1/10 on-road, off-road buggy, short course truck,
truggy, crawler, tank, boat

Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great
than or equal to 12 turn, RPM over 30,000 at 7.2v

Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great
than or equal to 18 turn, RPM over 20,000 at 7.2v

Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm

PWM Frequency: 1 KHz

BEC: 6V/3A

Battery Connector: XT60

Dimensions: 36.5x32x18mm

Weight: 39g


NOTE: Before driving in wet conditions, make sure that other
electronics fitted to the vehicle are safe to use (marked as
water-resistant or waterproof), or that they are fully enclosed and
protected from water and moisture (such as in a sealed
receiver/battery case). Fans mounted on speed controllers are not
water resistant - we recommend to disconnect the fan from the ESC
before driving in wet conditions and allow it to dry fully before
reconnecting the fan power. Lubricate exposed metal drivetrain
parts such as bearings, outdrives and diff shafts before driving in
wet conditions. Motors are not intended for submerged use and may
be damaged if used when under water. After driving in wet
conditions, make sure to rinse off dirt and any corrosive liquids
like saltwater with plain water and re-lubricate metal drivetrain
parts.

Download PDF instructions for #150624 (7.7 MB)

Maverick

Msc-60Br-Wp Waterproof Esc With Xt60 Plug 60A

£23.69

The MSC-60BR-WP is a powerful and durable speed controller
that is fantastic for all RC vehicles equipped with a brushed motor
of 12 turns or more. The MSC-60BR-WP is also fully waterproof,
making it the only choice for anyone who enjoys playing on the
beach, in snow or even through mud!


If you've got plenty of power to strap into your RC, you can
count on the MSC-60BR-WP to handle it: able to handle LiPo
power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can
handle just about anything can you fit into the chassis! Of course,
a safety cut-off is fitted to protect your LiPo batteries.


Features:

2S or 3S LiPo with voltage protection

5-9 cell NiMH or NiCd

Suitable for all types of 1/10th scale vehicles


Specification:

Forward Continuous Current: 60A

Forward Continuous Current: 60A

Forward Burst Current: 360A

Reverse Continuous Current: 230A

Reverse Burst Current: 180A

Input: 2-3S LiPo, 5-9 cell NiMH/NiCd

Applications: 1/10 on-road, off-road buggy, short course truck,
truggy, crawler, tank, boat

Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great
than or equal to 12 turn, RPM over 30,000 at 7.2v

Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great
than or equal to 18 turn, RPM over 20,000 at 7.2v

Resistance: FWD 0.001 Ohm, BWD 0.002 Ohm

PWM Frequency: 1 KHz

BEC: 6V/3A

Battery Connector: XT60

Dimensions: 36.5x32x18mm

Weight: 39g


NOTE: Before driving in wet conditions, make sure that other
electronics fitted to the vehicle are safe to use (marked as
water-resistant or waterproof), or that they are fully enclosed and
protected from water and moisture (such as in a sealed
receiver/battery case). Fans mounted on speed controllers are not
water resistant - we recommend to disconnect the fan from the ESC
before driving in wet conditions and allow it to dry fully before
reconnecting the fan power. Lubricate exposed metal drivetrain
parts such as bearings, outdrives and diff shafts before driving in
wet conditions. Motors are not intended for submerged use and may
be damaged if used when under water. After driving in wet
conditions, make sure to rinse off dirt and any corrosive liquids
like saltwater with plain water and re-lubricate metal drivetrain
parts.

Download PDF instructions for #150624 (7.7 MB)

View product